Per OSHA requirements, standard toeboards must be __ inches high and securely fastened in place, and with not more than 1/4-inch clearance above floor level.

Prepare for the Safety and Pollution Prevention Welding Test. Use various study materials, including flashcards and questions with explanations, to ensure your success. Ace the test with confidence!

Multiple Choice

Per OSHA requirements, standard toeboards must be __ inches high and securely fastened in place, and with not more than 1/4-inch clearance above floor level.

To prevent tools and debris from falling off a work edge, OSHA sets a specific size for the protective barrier. A standard toeboard must be four inches high and securely fastened so it stays in place. The distance between the bottom edge of the toe board and the floor should be no more than a quarter inch, keeping the gap tight to stop small items from slipping underneath. Four inches is tall enough to stop most ordinary objects from passing over, while the tight bottom clearance helps contain anything that might be kicked or drift off the edge. If the height were only a couple of inches, objects could easily go over; a much taller board isn’t required and could interfere with access. This combination of height and a minimal floor clearance is what helps protect workers on the platform and those below.

Per OSHA requirements, standard toeboards must be __ inches high and securely fastened in place, and with not more than 1/4-inch clearance above floor level.

Prepare for the Safety and Pollution Prevention Welding Test. Use various study materials, including flashcards and questions with explanations, to ensure your success. Ace the test with confidence!

Per OSHA requirements, standard toeboards must be __ inches high and securely fastened in place, and with not more than 1/4-inch clearance above floor level.

Get the latest from Passetra